Many people ask: How to do a good job in the maintenance and repair of welded pipe mill?
Minor repair: This maintenance work is mainly aimed at removing the damage caused by the welding pipe mill during actual use. Furthermore, it can ensure the normal operation of mechanical equipment and related process requirements.
Intermediate maintenance : At this time, we carry out targeted maintenance, disassembling parts of the equipment and replacing worn parts. Restore the working accuracy of the welding pipe mill. Improve production efficiency.
- 1. Firstly, we often check the fuel tank of the welding pipe equipment. If the oil level is below the specified value, it needs to be added in a timely manner.
- 2. If the oil filter of the welding pipe equipment is blocked by impurities, we need to replace it in a timely manner and clean the blocked impurities. The normal cleaning cycle is three months.
- 3. When we add oil to the fuel tank of the welding pipe equipment, it must be filtered first and no water can be mixed in.
- 4. If we use welded pipe equipment in winter or cold regions, we need to turn it on for a while and then stop for a while to relax, so that the oil temperature of the welded pipe equipment increases. When the hydraulic pump station can operate flexibly, we can start working.
- 5. All buttons on the entire welding pipe equipment cannot be moved randomly. If adjustments are necessary, they must be made under the guidance of professional personnel.